SMOK SCAR-18 230W Starter Kit

The SMOK SCAR-18 is a 230W box mod built around SMOK's IQ-X chipset: 1-230W in variable-wattage mode, 10-230W in temperature-control mode, with TC support for nickel, titanium, and stainless-steel coils plus adjustable TCR. It runs on two 18650 batteries wired in series, sold separately, and charges over a MicroUSB port. A 0.96-inch color TFT screen shows wattage, resistance, and battery level, and the mod carries an IP67 rating: sealed against dust and rated for immersion in up to a meter of water for 30 minutes. The zinc-alloy frame measures 88 x 54 x 30.6mm, with side panels that vary by color family: leather, a resin swirl, or wood grain.

Big D Vapor carries the SCAR-18 in twelve finishes across two tank pairings. Black, Fluid 7-Color, Fluid Black White, Fluid Blue, Fluid Gold, Fluid Red, Green Stabilizing Wood, and Red Stabilizing Wood ship with the 6.5mL TFV9 tank, 28mm across, with a slide-to-fill top and two V9 meshed 0.15ohm coils, one preinstalled. Blue, Brown, Grey, and Red ship with the 7.5mL, 31.6mm TFV18 tank instead, with a 0.15ohm TFV18 dual meshed coil preinstalled and a 0.33ohm TFV18 meshed coil as the spare. Either version includes the mod, tank, both coils, a spare glass tube, a MicroUSB cable, and the manual; batteries are not included. It suits you if you're moving from a pod system into sub-ohm coils and higher wattage and already have 18650 cells and a charger.

Specs

• Chipset: IQ-X
• Output: VW mode 1-230W; TC mode 10-230W (230W max)
• Temperature control: Nickel, titanium, and stainless-steel coils, plus adjustable TCR
• Battery: Two 18650 cells wired in series (not included)
• Charging port: MicroUSB, side-mounted
• Display: 0.96-inch color TFT screen
• Ingress protection: IP67 — dustproof; withstands water immersion between 15cm and 1m for 30 minutes
• Dimensions: 88 x 54 x 30.6mm
• Chassis: Zinc-alloy frame; side-panel finish varies by color (leather, Fluid resin, or Stabilizing Wood grain)
• TFV9 tank: 6.5mL (bubble glass), 28mm diameter, 304 stainless steel, slide-to-fill top with childproof lift-and-open cap
• TFV9 coils: V9 meshed 0.15ohm, two included, one pre-installed
• TFV18 tank: 7.5mL, 31.6mm diameter, top fill, dual slotted bottom airflow ring, threaded 510
• TFV18 coils: 0.15ohm TFV18 dual meshed (pre-installed), 0.33ohm TFV18 meshed (spare)
• Colors — TFV9 pairing: Black, Fluid 7-Color, Fluid Black White, Fluid Blue, Fluid Gold, Fluid Red, Green Stabilizing Wood, Red Stabilizing Wood
• Colors — TFV18 pairing: Blue, Brown, Grey, Red

Compatibility

• SMOK TFV9 tank (6.5mL) — Black, Fluid, and Stabilizing Wood color variants
• SMOK TFV18 tank (7.5mL) — Blue, Brown, Grey, and Red color variants
• V9 meshed 0.15ohm coils (TFV9 pairing)
• TFV18 dual meshed 0.15ohm and TFV18 meshed 0.33ohm coils (TFV18 pairing)
• Requires two 18650 batteries in series, sold separately

What's in the box?

• TFV9 tank version:
• 1x SMOK SCAR-18 mod
• 1x TFV9 tank (6.5mL) with one V9 meshed 0.15ohm coil pre-installed
• 1x spare V9 meshed 0.15ohm coil
• 1x spare glass tube
• 1x MicroUSB cable
• 1x user manual
• (two 18650 batteries required, not included)
• TFV18 tank version:
• 1x SMOK SCAR-18 mod
• 1x TFV18 tank (7.5mL) with 0.15ohm TFV18 dual meshed coil pre-installed
• 1x spare 0.33ohm TFV18 meshed coil
• 1x spare glass tube
• 1x MicroUSB cable
• 1x user manual
• (two 18650 batteries required, not included)