SMOK Morph S Pod-80 Kit

The SMOK Morph S Pod-80 pairs a 5mL top-fill Morph pod with a single-18650 mod that adjusts from 5W to 80W. The battery is sold separately; output voltage runs 0.8-4.1V across a 0.15-2.5ohm resistance range. The pod runs SMOK's LP2 coils, the same series used in the RPM 4 kit, and ships with a 0.23ohm meshed coil preinstalled for a direct-lung pull and a spare 0.4ohm meshed coil rated at 25W for a cooler draw; a 0.6ohm DC coil rated 15-25W is sold separately for a tighter, lower-wattage pull. A toggle switch adjusts the dual air inlets, the pod locks in magnetically, and the small OLED screen reads vertically or horizontally. Charging is over USB Type-C.

Inside the box are the device, a Morph pod with the 0.23ohm coil preinstalled, a spare 0.4ohm coil, a Type-C cable, and the manual; the 18650 battery is not included. Big D Vapor carries it in four finishes, Black Blue, Black Carbon Fiber, Black Red, and Grey, on a zinc-alloy chassis measuring 123.35 x 39.5 x 29.9mm and weighing 105.5g. It suits you if you keep a charged 18650 on hand and want one mod that covers a mesh-coil direct-lung pull down to a tighter, lower-wattage draw, or if you're upgrading from an RPM 4 and want to reuse the same LP2 coils.

Specs

• Battery: Single 18650 (sold separately)
• Output: 5-80W adjustable; output voltage 0.8-4.1V
• Resistance range: 0.15-2.5ohm
• Pod: 5mL Morph pod, top-fill (silicone-stoppered), magnetic connection
• Coil series: SMOK LP2 (also used in the SMOK RPM 4 kit): 0.23ohm meshed coil (included, preinstalled), 0.4ohm meshed coil rated 25W (included, spare), 0.6ohm DC coil rated 15-25W (sold separately)
• Airflow: Adjustable via toggle switch, dual air inlets
• Display: OLED, switchable vertical/horizontal orientation
• Coil installation: Press-fit
• Charging: USB Type-C
• Chassis material: Zinc alloy
• Dimensions: 123.35 x 39.5 x 29.9mm
• Weight: 105.5g (3.72oz)
• Available colors (Big D Vapor's 4 variants, from SMOK's wider color run): Black Blue, Black Carbon Fiber, Black Red, Grey

Compatibility

• SMOK LP2 coil series: 0.23ohm and 0.4ohm meshed coils (included), 0.6ohm DC coil (sold separately)
• LP2 coils are shared with the SMOK RPM 4 kit

What's in the box?

• 1x SMOK Morph S Pod-80 device
• 1x Morph pod (5mL) with 0.23ohm LP2 meshed coil preinstalled
• 1x LP2 meshed 0.4ohm coil (spare)
• 1x USB Type-C cable
• 1x user manual
• 18650 battery not included